ELECTROLUX-REX PQF750UOX Manual de usuario

PQF750EN HOB USER MANUAL

6.4 Cleaning the hob• Remove immediately: melted plastic,plastic foil, and food with sugar. If not,the dirt can cause damage to the hob.• Remove when

Problem Possible cause Remedy The fuse is released. Make sure that the fuse isthe cause of the malfunc-tion. If the fuse releasesagain and again, con

8. INSTALLATIONWARNING!Refer to Safety chapters.8.1 Before the installationBefore you install the hob, write down theinformation bellow from the ratin

ground connection agrees with thestandards and regulations.• Do not let the power cable to heat upto a temperature higher than 90° C.To prevent contac

Kitchen unit with doormin 20 mm(max 150 mm)30 mm60 mmBAA) Removable panelB) Space for connectionsKitchen unit with drawermin 20 mm(max 150 mm)30 mmCA6

Electric supply: Appliance category: I2H Gas connection: G 1/2" Appliance class: 3 9.4 Gas burners for NATURAL GAS G20 20 mbarBURNER NORMAL

11. ENVIRONMENT CONCERNSRecycle the materials with the symbol .Put the packaging in applicable containersto recycle it. Help protect the environmenta

ENGLISH17

www.electrolux.com18

ENGLISH19

CONTENTS1. SAFETY INFORMATION... 22. SAFETY INSTRUCTIONS...

www.electrolux.com/shop867305058-B-422014

injuries and damages. Always keep the instructions withthe appliance for future reference.1.1 Children and vulnerable people safety• This appliance ca

• If the supply cord is damaged, it must be replaced bythe manufacturer, an authorized Service or similarlyqualified persons in order to avoid a hazar

applicable) can make the terminalbecome too hot.• Use the correct electricity mains cable.• Do not let the electricity mains cabletangle.• Make sure t

• Do not put flammable products oritems that are wet with flammableproducts in, near or on the appliance.WARNING!Risk of damage to theappliance.• Do n

3. PRODUCT DESCRIPTION3.1 Cooking surface layout43211Semi-rapid burner2Rapid burner3Auxiliary burner4Control knobs3.2 Control knobSymbol Descriptionno

lets the thermocouple warm up. If not,the gas supply is interrupted.3. Adjust the flame after it is regular.If after some tries the burnerdoes not lig

CAUTION!Make sure that the pots areplaced centrally on the burnerin order to get maximumstability and to get lower gasconsumption.5.2 Diameters of coo